Combustion Heads

OEM Boiler Parts, Co. (A division of LMS Mechanical)  can supply you with a new Gordon-Piatt® combustion head. When replacing the head, you may also wish to replace the gas orifices, pilot assembly, swirler, and combustor (if applicable).

If you could find the metallic Gordon Piatt®  part number tag on your burner, or in the parts list information that came with the burner when new, that would be the holy grail!!

documentation that came with your burner, it will be listed on the material list.

If you are replacing the gas orifices we’ll need to know the part number (or length) and drill size.

If you are replacing the air swirler we’ll need the part number listed on your material list.

Some burners are built with a combustor. A combustor is a cone shaped piece that is welded or bolted to the end of the combustion head. If your burner has a combustor, it will need to be replaced when you buy a new combustion head. The part number of the combustor will be listed on your material list. We may also be able to help identify yours if you can provide a sketch with dimensions.

If not, please provide the following information:

  • Burner Model
  • Make/model of the boiler on which the burner is installed.

Gordon PIatt Gordon Piatt Gordon Piatt

Below you will find diagrams to assist you in locating your Gordon Piatt® Combustion Head Part Number (Click Images to Enlarge).

    Please fill out this form with as much information as possible. A Parts Sales Associate will respond via email.